+ Reply to Thread
Page 2 of 2
FirstFirst 1 2
Results 16 to 20 of 20

Thread: Corvette C4 front end... I finally started cutting!

  1. #16
    Member blown71duster's Avatar
    Join Date
    Feb 2010
    Location
    Ohio
    Posts
    34

    There is a place called progressive auto that sells kits, but I was told they wont work in a mopar application because of the rack being up so high . You might give them a call and double check ,but I think the engine won't clear it.

    http://www.progressiveautomotive.com...acket-kit.html

    Art Morrisons c6 kit, they lower the attachment location on the spindle to lower the rack down lower in the cradle.
    http://www.artmorrison.com/maxg.php

  2. #17
    FNG
    Join Date
    Jun 2013
    Location
    Sweden
    Posts
    5

    Are thread owner still on here?

    Best regards from Sweden

  3. #18
    FNG
    Join Date
    Aug 2010
    Location
    Rochester, MI
    Posts
    11

    Quote Originally Posted by crille_hallden View Post
    Are thread owner still on here?

    Best regards from Sweden
    I'm still here. I spent some of last spring seeing how the 5.7 hemi would fit in there, and rest of the summer and fall redoing my deck and attempting to tune the carb/timing on the 383 in my RoadRunner. Result... Deck looks killer (wasn't cheap...ouch!) and the RR Engine is being rebuilt and balanced with the right stuff this time (previous owner's rebuild the last time). Dart is the "long term" project. No updates, unfortunately. I'm sitting here now trying to figure out what the hell happened to the time...

  4. #19
    FNG
    Join Date
    Aug 2016
    Location
    Central IL
    Posts
    1

    Any progress on this?
    I was contemplating into using a C4 Knuckle + 73 B-Body LCA on my Dart

  5. #20
    Senior Member SuperB70's Avatar
    Join Date
    Aug 2010
    Location
    Finland, Europe
    Posts
    141

    I have installed many C4 front axles to veries cars. Made an jig for original "k-member" and with correct factory geometrics. Front track is around 60"

    Looking pictures, at first clanse seems to me that you are installing it little low to frame rails.

    Anybody interested, can find build pics in Instagram about my own project '70 Super Bee a.k.a Plan Bee. Tag #project_plan_bee
    Also other work/ fab stuff. Also C4 swap.
    Custom Creations Oy (inc.)
    ceecee.fi
    Follow me at FB-> custom creations oy

+ Reply to Thread
Page 2 of 2
FirstFirst 1 2

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts