+ Reply to Thread
Page 7 of 7
FirstFirst 1 2 3 4 5 6 7
Results 91 to 105 of 105

Thread: put on hold for to long. my 73 cuda

  1. #91
    Senior Member Brads70's Avatar
    Join Date
    Sep 2010
    Location
    Barrie, Ontario, Canada
    Posts
    917

    Looks nice I've been eyeing one of those myself. What brand is it? I suspect they are the same tool rebranded and sold in various outlets?

    https://www.summitracing.com/int/par...7207/overview/

  2. #92
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    thats where I bought it from. rebranded- says classic tube on the box but warranty card is from Mastercool. https://www.mastercool.com
    I bought the 37 degree dies also.
    Last edited by cps; 11-13-2017 at 03:35 PM.

  3. #93
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    gots some parts in for the fuel system. just need to find a piece of dynomat to use as a tank pad.




  4. #94
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    been a while.
    had a plate made up to reinforce the firewall for the 2014 charger brake booster. I moved it down and closer to the inner fender a little bit. still mocking it up, I have to modify the pedal assembly to make sure that will work....




  5. #95
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    a little more work on the brake pedal today.






  6. #96
    Senior Member Brads70's Avatar
    Join Date
    Sep 2010
    Location
    Barrie, Ontario, Canada
    Posts
    917

    progress!!!

  7. #97
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82



    now I have to bolt up the booster and pedal assembly then try to figure out where to place the abs module . on the 2014 Dodge Charger its in the engine compartment passenger side frame rail, I want to hide it under the drivers side front fender just behind the headlight bucket. i'd have to extend the wire harness which hope fully doesn't mess with the can-bus system. gonna go take a look at the harness.

  8. #98
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82



    fits good. I'm happy with it , got about 1/4" between closest part of the brake booster and the inner fender. I think im going to mount the abs pump on the driver side, with a bracket that attaches to the bumper bracket. just have to find my bumper bracket...

  9. #99
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    Finally got around to making the ABS mount. Think this is about where it is going to go. Either going to bolt it to the bumper bracket or weld it, leaning towards welding it.




  10. #100
    Senior Member Brads70's Avatar
    Join Date
    Sep 2010
    Location
    Barrie, Ontario, Canada
    Posts
    917

    Nice to see someone posting again! Nice work!

  11. #101
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    got the bracket welded in. gotta order some brake lines and start bending lines.














  12. #102
    Senior Member Grimmey71's Avatar
    Join Date
    Feb 2011
    Location
    Saint clair shores michigan
    Posts
    178

    Awesome now we just need aftermarket traction/launch control

  13. #103
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    I think the U-Connect can be upgraded to the SRT software that will cover the traction/launch control. thats if I can get a good signal from the speed sensors....

    got my brake tubing today, hope I can get in the garage this weekend and get something done.

  14. #104
    Member Garner7555's Avatar
    Join Date
    Feb 2016
    Location
    Muscadine, AL
    Posts
    45

    Looking Good

  15. #105
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    82

    started running some brake lines. not happy with them but they will work for now.






+ Reply to Thread
Page 7 of 7
FirstFirst 1 2 3 4 5 6 7

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts