+ Reply to Thread
Page 7 of 7
FirstFirst 1 2 3 4 5 6 7
Results 91 to 100 of 100

Thread: put on hold for to long. my 73 cuda

  1. #91
    Senior Member Brads70's Avatar
    Join Date
    Sep 2010
    Location
    Barrie, Ontario, Canada
    Posts
    917

    Looks nice I've been eyeing one of those myself. What brand is it? I suspect they are the same tool rebranded and sold in various outlets?

    https://www.summitracing.com/int/par...7207/overview/

  2. #92
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    79

    thats where I bought it from. rebranded- says classic tube on the box but warranty card is from Mastercool. https://www.mastercool.com
    I bought the 37 degree dies also.
    Last edited by cps; 11-13-2017 at 03:35 PM.

  3. #93
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    79

    gots some parts in for the fuel system. just need to find a piece of dynomat to use as a tank pad.




  4. #94
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    79

    been a while.
    had a plate made up to reinforce the firewall for the 2014 charger brake booster. I moved it down and closer to the inner fender a little bit. still mocking it up, I have to modify the pedal assembly to make sure that will work....




  5. #95
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    79

    a little more work on the brake pedal today.






  6. #96
    Senior Member Brads70's Avatar
    Join Date
    Sep 2010
    Location
    Barrie, Ontario, Canada
    Posts
    917

    progress!!!

  7. #97
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    79



    now I have to bolt up the booster and pedal assembly then try to figure out where to place the abs module . on the 2014 Dodge Charger its in the engine compartment passenger side frame rail, I want to hide it under the drivers side front fender just behind the headlight bucket. i'd have to extend the wire harness which hope fully doesn't mess with the can-bus system. gonna go take a look at the harness.

  8. #98
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    79



    fits good. I'm happy with it , got about 1/4" between closest part of the brake booster and the inner fender. I think im going to mount the abs pump on the driver side, with a bracket that attaches to the bumper bracket. just have to find my bumper bracket...

  9. #99
    Member
    Join Date
    Nov 2014
    Location
    mastic beach
    Posts
    79

    Finally got around to making the ABS mount. Think this is about where it is going to go. Either going to bolt it to the bumper bracket or weld it, leaning towards welding it.




  10. #100
    Senior Member Brads70's Avatar
    Join Date
    Sep 2010
    Location
    Barrie, Ontario, Canada
    Posts
    917

    Nice to see someone posting again! Nice work!

+ Reply to Thread
Page 7 of 7
FirstFirst 1 2 3 4 5 6 7

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts